Why Does My Gaming Chair Keep Going Down and How Can You Fix it

Ever hit the highest score just when your gaming chair decides to slump? Are you wondering why does my gaming chair keep going down? You’re not alone. Many gamers face this issue and get distracted during their gaming sessions.

Now, wouldn’t it be a game-changer if you knew how to fix this sinking issue? Stick around as we guide you through the root causes of chairs sinking along with the solutions.

Reasons with Solutions

Reason 1: Faulty Gas Lift Cylinder

One common reason for your gaming chair going down is a faulty gas lift cylinder which is responsible for supporting the weight and adjusting the height. Over time, the seals in the cylinder can wear out, causing it to lose pressure and slowly sink.

Solution to Fix it

Things you will need:
  • A new gas lift cylinder
Fix:

You can replace the faulty gas lift cylinder yourself. You just need to remove the base of the chair, slide the old cylinder out, and put the new one in place. Make sure to buy a new gas lift cylinder with the correct size and compatibility with your chair model.

Reason 2: Loosened Adjustment Knob

A loosened adjustment knob could also be the culprit in sinking your chair. This knob controls the tension of the tilt mechanism and if it’s not tightened properly, the chair may go down when you sit on it.

Solution to Fix it

Things you will need:
  • Basic toolkit
Fix:

Just tighten the knob. It’s typically located under the seat, and you can adjust it by turning it clockwise with your hands or a tool. Make sure not to over-tighten, as this could strip the threads and cause further damage.

Reason 3: Worn-out Bearing

A worn-out bearing inside the mechanism of the chair could lead to the chair sinking. This usually happens with old chairs and extensive use.

Solution to Fix it

Things you will need:
  • New bearings
  • Basic toolset
Fix:

This might be a bit complex, as it involves disassembling the chair’s mechanism to replace the bearings. It is the best practice to get the old bearings replaced with new ones by a professional.

Reason 4: Damaged Control Mechanism

A damaged control mechanism can also be a reason for the sinking issue. If you notice that the chair is going down even after you’ve locked the height adjustment, this could be the problem.

Solution to Fix it

Things you will need:
  • A new control mechanism
  • Basic toolkit
Fix:

You’ll need to remove the faulty control mechanism and install the new one with the help of tools. Ensure the new control mechanism you get is compatible with your chair. If you’re not confident about doing this yourself, consider getting professional help.

Reason 5: Broken Seat Plate

A broken or bent seat plate can lead to the chair sinking. This metal plate attaches the seat to the gas lift cylinder and control mechanism.

Solution to Fix it

Things you will need:
  • A new seat plate
  • Basic toolkit
Fix:

Remove the old seat plate and replace it with a new one with the help of tools. Make sure that the replacement seat plate is the correct size and compatible with your chair type.

Reason 6: Faulty Adjustment Lever

The adjustment lever is what you usually pull to adjust the height of the chair. If it’s faulty or broken, it may not hold the chair at your desired height.

Solution to Fix it

Things you will need:
  • A new adjustment lever
  • Basic toolkit
Fix:

Replacing the adjustment lever will require you to remove the old one and install the new one with the help of tools. Make sure the new adjustment lever you purchase is compatible with your chair model. This can typically be replaced with the help of basic tools but if you think you can not do it by yourself, then consider getting it replaced by a professional.

Reason 7: Internal Leakage in the Gas Cylinder

This is similar to a faulty gas lift cylinder but specifically refers to internal leakage, which can cause the chair to lose pressure and sink.

Solution to Fix it

Things you will need:
  • A new gas lift cylinder
  • Basic toolkit
Fix:

Just as with a general faulty gas lift cylinder, you’ll need to replace it with the basic tools. Be careful when handling the gas lift cylinder, as it’s under pressure. Once again, ensure the replacement part is compatible with your chair model.

Reason 8: Worn-out Seat Cushion

Sometimes, the issue might not be with the mechanical components at all. If the seat cushion has become compressed or worn out over time, the chair might feel like it’s sinking when it’s actually not.

Solution to Fix it

Things you will need:
  • New seat cushion or padding material
Fix:

You can replace the entire seat cushion if it’s detachable, or add padding to the existing cushion if it’s not. This is a relatively easy fix and in this way, you can also increase the comfort of your gaming chair.

Reason 9: Loose or Broken Screws

Loose or broken screws can affect the stability and function of the chair, causing it to sink.

Solution to Fix it

Things you will need:
  • Screwdriver
  • Replacement screws (if necessary)
Fix:

Tighten any loose screws you find in the chair’s mechanism. If any screws are broken, you’ll need to replace them. Remember to use screws of the correct size and type to avoid causing additional damage.

Reason 10: Defective Chair Base

If the chair’s base is defective or damaged, it might not support the weight properly, causing the chair to lower or feel like it’s sinking.

Solution to Fix it

Things you will need:
  • A new chair base
  • Basic toolkit
Fix:

Remove the old chair base and replace it with a new one with the help of tools. Make sure that the new base is the correct size and type for your chair.

Reason 11: Accumulated Dust or Debris

Sometimes, the problem might be as simple as dust or debris accumulating within the chair’s mechanisms, causing it to malfunction.

Solution to Fix it

Things you will need:
  • Cleaning supplies (soft cloth, mild detergent)
Fix:

Give your chair a good cleaning. Pay special attention to the area around the adjustment lever and the base of the chair where the gas lift cylinder is located. Use a soft cloth and a mild detergent, and make sure not to get any parts too wet, as this could cause rust or other damage.

Reason 12: Overuse and Age

Just like any other item, overuse and age can lead to a gaming chair going down. The internal components wear out over time, leading to this issue.

Solution to Fix it

Things you will need:
  • New gaming chair
Fix:

If your chair is quite old and you’ve identified wear and tear, it may be time for an upgrade. Consider investing in a good-quality chair that can withstand heavy use and last for a long time.

Reason 13: Excessive Weight

A chair might start sinking if it’s regularly loaded with weight exceeding its capacity. This puts excess strain on the gas cylinder and the other components, causing them to wear out faster.

Solution to Fix it

Things you will need:
  • New gaming chair (optional)
Fix:

Try to reduce the strain on the chair by minimizing the weight it carries. If the issue continues, you may need to consider investing in a new gaming chair that’s designed to handle a higher weight capacity.

Remember, gaming chairs are essential to your gaming experience and comfort. Maintaining them and fixing any issues promptly can ensure they serve you well and enhance your gaming sessions.

Different methods to prevent your gaming chair from sinking

Method 1: Check and Tighten the Screws

One of the key culprits behind your gaming chair’s unexpected down could be loose screws. The strain from daily long gaming marathons causes it. Keep an eye on those screws, and ensure they’re tight and locked. 

Method 2: Lubricate the Hydraulics

Those who’ve been gaming long enough know that a well-oiled machine operates best, and this applies to your gaming chair too. The hydraulics of your chair, if not properly lubricated, can cause sinking. Make sure to periodically apply some good quality lubricant, keeping your chair’s hydraulics smooth, just like your game moves.

Method 3: Adjust the Chair’s Pneumatic Cylinder

Sometimes the issue isn’t with the screws or the lubrication, but with the pneumatic cylinder that’s responsible for the height adjustment of your chair. If this is the case, then you should consider replacing the pneumatic cylinder.

Method 4: Use a Chair Cylinder Extension Kit

If you’ve tried everything and your chair still keeps sinking, a chair cylinder extension kit can be your savior. These kits effectively increase the height of your chair’s cylinder, helping to prevent that sinking feeling. It’s like finding a rare item in a game that just makes everything better.

Method 5: Replacing the Chair

I know, I know. This is the method we all want to avoid. But sometimes, a chair has already lived its full life and it’s time to invest in a new one to have the best gaming experience.

How to inspect your sinking gaming chair

Identify The Problem

Before you can fix a problem, you need to understand it. If your chair keeps sinking, the issue is most likely with the gas lift cylinder. It’s the part that gives your chair the ability to adjust the height. Over time, with all the ups and downs, the gas inside might leak, causing your chair to sink.

Inspection Tools

Don’t be overwhelmed by the term ‘inspection’; you won’t need a bunch of complicated tools for this task. Most gaming chairs use similar mechanisms, so a basic tool kit can work for you best. Grab a flashlight for better visibility, a screwdriver to remove or tighten any screws, and a bit of clean cloth to wipe off any dust or grime.

Process Of Inspection

Visual Inspection

Start your task with a visual inspection. Look for obvious signs of wear or damage. Pay special attention to the cylinder area. Use your flashlight to look carefully, small leaks or cracks might be causing the sinking trouble.

The ‘Bounce’ Test

Sit on the chair and bounce lightly. Watch closely. If the chair sinks during this test, the cylinder is likely at fault.

The ‘Wait and Watch’ Test

Another simple test is to adjust your chair to your preferred height, and just wait. If it stays up for a while and then starts sinking gradually, the chair’s cylinder is the culprit here.

Decision Time: Repair or Replace?

Once you’ve confirmed the problem, you’ve got two main choices – repair or replace. If you’re handy and can fix the issues by yourself or get it resolved by a professional, then you should buy chair replacement parts or cylinders and get it fixed. On the other hand, if you’re not confident that repairing the chair can fix the problem due to the old age of the chair, then you should replace your current chair with the new one.

Tips for sinking gaming chair maintenance

That sudden sinking spell during an intense game is usually due to a tired gas lift cylinder. You know, the part that gives our chairs the magical power of height adjustability? Yes, that. Over time, like all good warriors, it can lose its strength, but that doesn’t mean the game is over!

Tip 1: Regular Check-ups

Just like our health, our gaming chairs also require regular check-ups. So, make it a habit to inspect your chair’s cylinder for any visible damage or leaks, especially if you’ve been using the same chair for years now.

Tip 2: The Cylinder Cover Trick

Here’s a handy trick. If your chair is sinking, try this inexpensive hack. Buy a PVC pipe that fits the diameter of your gas cylinder. Cut it to the length that stops your chair from sinking. Slide this cover over the cylinder, and that’s it! You’ve just extended your gaming chair’s life!

Tip 3: Replacing the Gas Cylinder

Now, if your chair is still sinking, it is time to give the gas cylinder a farewell instead of your chair. Replacing it isn’t as hard as cracking the ultimate gaming code. You just need a basic toolkit to replace it. But if you’re not confident enough, get it done by a professional.

Tip 4: Lubrication is Key

Another essential tip, don’t forget to lubricate your chair’s mechanisms regularly. The squeaks and groans from the chair should not be your game’s background music.

Tip 5: Maintain Proper Weight Distribution

Lastly, try to maintain even weight distribution while seated. It reduces the pressure on the cylinder, helping it last longer. So, don’t lean too heavily on one side, no matter how intense the game gets!

Conclusion

In conclusion, there are various reasons why your gaming chair keeps sinking such as a faulty gas lift cylinder, loosened adjustment knob, worn-out bearings, overuse, and excessive weight. Each issue can be resolved with its specific solution. Regular maintenance, such as cleaning, tightening loose screws, and lubricating can prevent your chair from sinking.  However, if your chair is very old and has lived its life fully or is frequently loaded with weight beyond its capacity, it is time to consider investing in a new, high-quality gaming chair. 

Frequently Asked Questions

How do you fix a chair that keeps going down?

If your chair keeps going down, it’s usually due to a faulty gas lift cylinder. The solution? Replace the cylinder. Remove the base of the chair using a wrench or pliers, insert a new cylinder, and that’s it- your gaming chair is back to its old form now.

How do I stop my gaming chair from lowering itself?

If your gaming chair keeps lowering itself, it’s likely the gas cylinder is worn out. The remedy is straightforward – replace the worn-out gas cylinder, and your chair begins to hold its height as it used to.

Why does my chair keep lowering?

If your chair keeps lowering, it’s likely due to a faulty gas lift cylinder. This part can wear out over time, but it’s replaceable. Once replaced, your chair is ready to maintain your desired height.

How do you fix an adjustable chair that won’t stay up?

An adjustable chair that won’t stay up usually has a failing gas lift cylinder. The solution is to replace this part. A new cylinder should get your chair back to supporting your epic gaming battles.

Leave a Reply

Your email address will not be published. Required fields are marked *